so.png
so12.png
so12 (2).png
so12 (5).png

Pink noise or a 1kHz testing tone is routed to the balanced XLR, but it can also be routed to the 1/4″ Jack to test DI boxes.

 

Adjust the output level to -10, -20 or -40 dBu.

 

Inject your signal while checking for healthy P48. An easy, quick and effective way to thoroughly line-check your inputs before soundchecks or verify your patch during quick change-overs.

68968304_2658113257749069_226752446205001728_n.jpg
2.jpg
1.jpg
so12 (6).png

Audio signals plugged into the female XLR or the 1/4” Jack connector are reproduced by the internal speaker. If in loud environments, plug your headphones into the 3.5mm Jack output.

 

A handy meter will give you an instant reading on the signal presence and peak.